Department of Physical Sciences, Meru University of Science and Technology (MUST)

About Meru University of Science and Technology 

Meru University of Science and Technology (MUST) is a young public university in Meru County of the Republic of Kenya having been chartered in March 2013 established under The Universities Act of 2012. Prior to the University status, MUST was a constituent college of Jomo Kenyatta University of Agriculture and Technology (JKUAT).

Meru University of Science and Technology Raspberry Pi Project

Meru University of Science and Technology has won a KENET Raspberry mini grant. This project is geared towards using a credit size gadget called Raspberry Pi (RPI) to teach computational units in the University. Raspberry Pi is a small device that was developed for teaching Computer Science in schools. Besides being portable, RPI is affordable and can be easily interfaced with the outside and used to perform automation projects.

As a pilot project, we will use RPI to teach three computational units on offer in the university during the April - August 2015 semester. We will also be conducting RPI related projects with an aim of publishing the results in referred journals. Students will be encouraged to develop their own projects using the pi and eventually showcase them within the University and other forums organized by RPI stake holders. Read more.

Executive Summary

The overall objective is to establish a Raspberry Pi teaching Laboratory in Meru University of Science and Technology (MUST). To achieve this a minimum of three computational units will be used to pilot the use of Raspberry Pi in teaching. Instructional manuals for teaching these units using Raspberry Pi will be developed and provided to the students. Student learning outcomes will be assessed throughout the semester. Publications regarding novel findings observed in the pilot stage will be presented in a refereed conference. Prior to the grant the university had already acquired a number of Raspberry Pi units and its accessories, developed exhibits of how Raspberry Pi can be used for teaching computer related courses in schools and showcased the projects in Commission for University Education exhibitions and ASK shows. Work is also in progress to develop a security surveillance system and an electronic device for early detection of crop diseases and other plant stress using Raspberry Pi. Upon successful completion of the pilot stage the university will upscale the use of Raspberry Pi in teaching more courses and launch a campaign for popularizing the adoption of Raspberry Pi in teaching computer related course in tertiary institutions of learning, secondary and primary schools within the environs of the university.

Team Members

• Mr. Daniel Maitethia Memeu - Department of Physical Sciences - Lead Researcher
• Mr. Ronoh Wycliffe – Department of Information Technology & Computer Science - Team member
• Mr. Abkul Orto - Department of Information Technology & Computer Science - Team member
• Mr. Kinuthia Mugi – Department of Engineering - Team member

Methodology of Implementation and Assessment

Setting up.jpg

The University currently has four teaching computer laboratories fully connected to the internet. One of these computer labs will be used to establish a Raspberry pi based teaching laboratory. Facilities such as computer monitors, USB keyboards and mice, internet connectivity and computer desks will be shared by the existing PCs and the Raspberry Pi modules to be acquired. A suitable mode of embedding the Raspberry Pi modules in the system unit will be adopted.

Meru University RPI team first training

On 2^nd march 2015 RPI project team underwent their first training on getting started with RPI. The course focused on the key components of the Pi, downloading and load the Raspbian (Raspberry Pi official OS) to the SD card, powering up the Pi, configuring the pi OS, launching basic Pi applications for word processing, spread sheet, presentation and internet browsing. Members were also introduced to Python programming using the Python IDE which comes with Raspbian.

Launch of RPI to Computing students

Class.jpg

On 15^th March  2015, the Meru University RPI team introduced RPI to computer science students. The students were explained the capabilities of the gadgets with demonstrations. In this meeting students resolved to organize themselves into groups to learn and develop more RPI applications. 

RPI related projects in progress

RPI imaging module for crop stress monitoring

Imaging.jpg

We are developing a system for detecting crop stress in green houses using Raspberry imaging module. The module comprises of the RPI connected to RPI camera. An executable Linux script for periodically taking photos is written and incorporated to the Linux task scheduler (cron) so that upon reboot the pi starts taking photos after a specified period. The system is powered by solar. So far the imaging module is complete and has been tested in the green house and has been found to be working fine. We are now working on suitable algorithms for processing the images captured for stress. We intend to use python and open CV imaging processing library to accomplish the task.

Raspberry pi Tutor project

Meru university Raspberry pi team is working on making Raspberry pi an ideal gadget for learning. The team is specifically developing educational applications for running on the Pi geared at making learning interesting right from early childhood. So far applications incorporating elementary English, mathematics, and technology lessons have been developed. Images, videos, and sound are used as learning aids in these subjects. 
The project has been showcased in various forums including the Commission of University exhibition held in Machakos in from 19th to 21st March, 2015, the NACOSTI exhibition week held in the University of Nairobi from 11th to 16th May 2015, and the Meru National ASK show held in Meru ASK show ground from 3rd to 6th June, 2015. members of the public were interested by the capabilities of the little device and agreed the Pi can make a great learning companion to the pupils and students as well as teachers.
The team main agenda as pertaining this project is to advocate for the adoption of the Raspberry pi (RPI) as an alternative to desktop/laptops/tablets computers in learning of IT related courses.

The presentation was categorized as an exhibition, and apart from showcasing our amazing gadget, the team was also able to interact and learn where to improve and the many possible challenges that the project is likely to encounter in the near future.

PROJECT DESCRIPTION (By developers: students from Meru University)
Target Audience: Class 1-4 students, Teachers
Application: Teaching Aid, Student management
Detailed Description:

Welcome.jpg

“CHEESE” is an innovative program that is aimed at teaching young students different subjects in an immersive and well interactive manner.
The Graphical user interface is developed in such a way to allow different students to log in so as to start the lesson
The student is required to type in their name and the teachers name after which a log is kept.
The teacher can then use the log to trace and make a follow up of which students were present for the class and also be able to access the student performance.
The program also allows working in groups by allowing login of different group members. This data is very useful to the teacher for progress assessment and grading.
From the login phase the student can choose from a range of different subject. Our personal favorite is Technology as a subsidiary of Science. In this subject the program present different logos and graphics and the students is supposed to recognize them and key in the correct answer. Points are awarded for correct answers.
But thats not all.

Teachers also have the ability to upload their own images that they feel may be appropriate and defining the correct answers thereby further extending the capability of the program.
This is because during the development of this program we not only have the students in mind but also the teachers who are supposed to be supervising the students.
There is a total of six subjects that students can select from:

SUBJECT	DESCRIPTION
Mathematics	The subject has simple arithmetic questions that the student is tasked with finding the answers to, awarding points for each correct answer answered
English	Aimed at the young children, this subject requires that the student identifies pictures and spells the correctly
Kiswahili	Graphics is core to the subject with students being tasked with translating and spelling different pictures.
Christian Education	Morals are an important lesson both to us and the society, which is why as part of our development in the project we designed simple stories some borrowed from famous tales to teach children different morals and life skills
Social Studies	<Under development>
Music	<Under development>
Art and Craft	<Under development>
Technology	In this subject the program present different logos and graphics and the students is supposed to recognize them and key in the correct answer.
	NB: For all of the above subjects, point are awarded for each correct answer

Developed by Mr. Michael Kamau and Steve Kisinga, both students from Meru University, we believe that the application has huge potential as a teaching aid as well as a good student management program that is user friendly.

About.jpg

We also presented the same project at the Meru ASK show where we scooped various awards, among them being the best innovation stand. Major efforts are being carried at ensuring that the project succeeds, and a lot of dedication is being displayed by the team members

RASPBERRY AS A TEACHING AID

CIT 3102 – FUNDAMENTALS OF COMPUTER PROGRAMMING

IMG 20150702 092618.jpg

The raspberry pi has been used in Meru university as a teaching aid to teach among other units, Fundamentals of computer programming.

Students were introduced to the raspberry pi, what it is, it's capabilities and its advantages. As part of the lesson students were required to use the raspberry pi to access the internet and use various search engines to find out the technical specifications of the device.

Students were intoduced to programming basic programming and taught basic proramming skills. Geany was used as the IDE of choice to teach C programming. Ranging from displaying simple text on the terminal to the more complex programming skills of assigning variables and accepting input, the raspberry pi has offered a great deal in helping teach the unit.

Geany.png

Introduction Raspberry Pi and GPIO programming

Professor Simon Cox and his team at the University of Southampton connected 64 Raspberry Pi boards to build 
an experimental supercomputer, held together with Lego bricks.

The project was able to cut the cost of a supercomputer from millions of dollars to thousands or even hundreds.

Introduction
System on a Chip

What does System on a Chip (SoC)mean?

A system on a chip (SoC) combines the required electronic circuits of various computer components onto 
a single, integrated chip (IC). 

A SoC is a complete electronic substrate system that may contain analog, digital, mixed-signal or radio frequency 
functions. 

Its components usually include a graphical processing  unit (GPU), a central processing unit (CPU) that may be 
multi-core, and system memory (RAM).

Because a SoC includes both the hardware and software,  it uses less power, has better performance, requires less 
space and is more reliable than multi-chip systems. Most system-on-chips today come inside mobile devices like 
smartphones and tablets.

A distinction between a microprocessor and a microcontroller should also be explained.

A microprocessor is an integrated circuit (IC) which has only the central processing unit (CPU) on it. Such as the 
Intel i7 CPU.

Microcontrollers have a CPU, memory, and other peripherals embedded on them.

A microcontroller can be programmed to perform certain functions.
A very popular microcontroller is the Arduino Uno.
The difference between a SoC and a microcontroller often times is defined by the amount of random access 
memory (RAM).
A SoC is capable of running its own operating system.

System on a Chip

The SoC we will use today is the Raspberry Pi B+.

The heart of this credit card sized computer is the Broadcom BCM2835 chipset that contains an ARM CPU 
and a Videocore4 graphics processing unit.

The B+ has a 700 MhzCPU and 512 MB of RAM.
Pi Assembly and Raspbian Install

We will now discuss how to assemble the components that make up the Raspberry Pi.
You will need the following (should be on the bench):
•Raspberry Pi B+ board
•HDMI to DVI cable
•Monitor or TV
•Micro SD card
•USB keyboard and mouse
•Micro USB power supply

Pi Assembly and Raspbian Install

We will now bake (assemble) the Pi!

Once you have it put together, power it on.

You should see the New Out Of Box Software (NOOBS)  operating system installer. 

Select the Raspbian [RECOMMENDED] option, change the  language to English (US), change the keyboard to US, and 
click install.

While the OS is installing we will discuss some electronics  information.

Voltage, Current, and Resistance

When a potential difference exists between two charged bodies that are connected by a conductor, electrons flow 
in the conductor. This flow is from the negatively charged body to the positively charged body.

The voltage does not flow, only the charge. Voltage supplies the “push” or “pressure”.

Plumbing Analogy

It is difficult to keep straight the concepts of voltage, current, charge, resistance, etc., but for 
electrical circuits there is a helpful analogy with plumbing systems. Wires are, of course, like pipes; 
current is like the rate of water flow (gallons per minute); and resistance is like friction in the 
pipes. Now, here is the most helpful part of the analogy: voltage is like water pressure, and 
batteries and generators are like pumps. Like all analogies, however, it doesn't quite work. 

Voltage, Current, and Resistance

Voltage can also be looked at as water pressure.We are mainly concerned with the potential 
difference between two points.

Ground is the reference point and is considered to have zero potential.
Electric current –directed flow of free electrons. 

Moves from a region of negative potential to a region of positive potential. 

Therefore it can be stated that electric current flows from negative to positive.

Voltage, Current, and Resistance

Breadboarding Basics

What is a Breadboard?
What circuit are we going to breadboard today?
Are these wires connected?
Which is Correct???
Longer 
Lead of 
LED goes 
on top
Connect Circuit to Pi

Now that you have a working resistor and LED circuit, we  can now connect it to the Raspberry Pi.

Located on the Pi is a 40 pin general purpose input output (GPIO) connector.

The 40 pins can be connected to various inputs or outputs. In our experiment we will connect our LED circuit to two of the outputs.

To connect the GPIO header to the breadboard we will 
use a 40 pin cable.

The red stripe on the cable indicates pin number 1, which 
is in the upper left corner of the GPIO header.

We will connect the ribbon cable as follows:

Pin 6 will be used for ground (common to both LEDs)

Pin 11 will be used for our output to the Blue LED

Pin 12 will be used for our output to the Red LED

Connect a black or brown wire to pin 6, and a red or orange wire to pin 11 and pin 12 on the ribbon cable.

Plug the black wire to the negative side of the circuit and the red wire to the positive side.

Your project should look like this:

Program the Pi

Now that the Pi is setup and the electronics are connected, we will now begin programming the GPIO 
output using a programming language known as Python.

Python is an interpreted, object-oriented, high-level programing language.

Python’s simple, easy to learn syntax emphasizes readability, which makes it easy to maintain and update.
Python is included in the Raspbian distribution.

We will run a simple python program to verify that our Pi 
is ready to go.

Logon to the Pi with the username of piand the password 
of raspberry
Program the Pi

You should now see the shell prompt like:

Type sudopythonand you should see the following:

Type quit() to exit from the python interpreter.

This shows us that Python is installed and ready for action.
Program the Pi

We will now write our first Python program.

Type sudonanohelloworld.pyand press Enter.

Nanois a text editor that can be used to type our code.

Type print “Hello World!”;

Once you have the code written, press CTRLand xat the  same time and press y to save the file.

Now type sudopython helloworld.pyYou should see:

We will now write some code to control the LED circuit.

Type sudonanoled.pyand press Enter.

import RPi.GPIOas GPIO

import time

GPIO.setmode(GPIO.BOARD)

GPIO.setup(11,GPIO.OUT)

GPIO.output(11,GPIO.HIGH)

time.sleep(1)

GPIO.output(11,GPIO.LOW)

GPIO.cleanup()

Note, these are 
capital O’s, not 
0’s (zeroes).

Add code to 
light up pin 12.

Program the Pi
Once you have the code written, press CTRLand xat the 
same time and press y to save the file.

Now type sudo python led.pyYou should see your LEDs 
light up for 1 second and turn off.

Modify your code to make the LEDs blink 3 times.
Program the Pi

import RPi.GPIOas GPIO

import time

GPIO.setmode(GPIO.BOARD)

GPIO.setup(11,GPIO.OUT)

for iin range (0,3):

GPIO.output(11, GPIO.HIGH)

time.sleep(1)

GPIO.output(11, GPIO.LOW)

time.sleep(1)

GPIO.cleanup()

{Be sure to 
use a tab 
instead of 
space here

Add code 
for pin 12!

Putting it all Together

You now have the skills to build a complete light show 
system!

Enjoy!